Ribbon Braided Bookmarks, Barrettes, and More!

Ribbon Braiding | Homan at Home

When I was 10 years old, I participated in a organization for girls called Achievement Days. It was run by our church, and different women in our congregation took turns teaching us a variety of skills. We learned to dip candles, print stationery, cook, sew, and much more.

One of the sisters was extremely interesting. She and her family lived without running water, but she viewed that as a step up from the teepee she and her husband had lived in when they were first married (Did I mention this was in Fairbanks, Alaska, where the average winter temperature is -25 F? Talk about hardcore!).

Ribbon Braiding | Homan at Home

Along with her wide variety of survival skills, this woman was the craftiest lady I’ve ever known.  She could take just about anything and turn it into a useful work of art. Her contribution to Achievement Days was to teach us how to braid ribbon. This is a skill I’ve made use of time and again.

  • Materials

  • 2 equal lengths of 1/2 inch satin ribbon
  • hot glue (for barrette)
  • barrette backing (for barrette)

Instructions

Match the ends of the two lengths of ribbon so they are even. Decide if you want to leave a tail, then tie them together with an overhand knot.

 img_20141205_161456

With the first ribbon (purple), make a small loop. Make a small loop with the second ribbon (cream) and insert it into the first loop. The first loop will be sort of open (see below).

img_20141205_161413 

img_20141205_161316

Now comes the tricky part (sorry about the poor quality pictures. I was trying to take them with one hand.) Bring the first ribbon around in front of the second and make a loop in the first with the long end on the outside.

img_20141205_161220

Stick the first ribbon into the second ribbon’s loop. Pull the second ribbon down until the first ribbon’s loop sits snugly in the first ribbon. Avoid pulling too tightly.

img_20141205_161126

Make a new loop with the second ribbon. Insert it into the first ribbon’s loop, and pull the first ribbon until the second ribbon’s loop sits snugly inside. Now the second ribbon’s loop should be sticking out.

img_20141205_161028

Continue looping and pulling until the braid is the desired length. To finish, pull the loop that is sticking out all the way toward you until the end is free.

img_20141205_160936

Bring the second ribbon over the braid.

img_20141205_160856

Tie an overhand knot to finish things off. As you pull, make sure not to squash your last braid.

img_20141205_160758

If you’re making a bookmark, you’re done!

To make the barrette, hot glue the finished braid to a barrette backing.

img_20141205_160624

Remember to cut the ribbon ends at an angle so they don’t fray!

Don’t forget to pin!

Ribbon Braiding | Homan at Home

(Visited 3,231 times, 2 visits today)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge

This site uses Akismet to reduce spam. Learn how your comment data is processed.